Platform bed with turned legs

Platform bed with turned legs DEFAULT

Submitted by Ana White on Wed, 07/31/ -



|Print this plan

For about the price of a box spring you can build your own modern platform bed frame.  You'll just need a few basic power tools and off the shelf lumber to build - and our free step by step plans with diagrams and shopping list.  

diy modern platform bed frame


diy bed frame dimensions diagram

Sized for queen mattress


Shopping List

2 – 1×8 Boards, 8′ Long

1 – 1×8 Board, 12′ Long

2 – 2×2 Boards, 8′ Long

2 – 2×6 Board, 8′ Long or Stud Length

13 – 1×3 Boards 2″ Screws Wood Glue Wood Filler Sand Paper Finishing Supplies

Common Materials


wood conditioner


Cut List

2 – 1×8 @ 60″ (End Rails)

2 – 1×8 @ 81 1/2″ (Side Rails)

4 – 2×6 @ 5 1/2″ cut at 45 degree angles (Corner Supports)

1 – 2×6 @ 80″ (Center Support)

2 – 2×2 @ 80″ (Cleats)

4 – 2×6 @ 5 1/2″ (Leg Bases)

16 – 1×3 @ 6 1/4″ (Leg Trim)

13 – 1×3 @ 60″ (Slats)


Step 1

Build the box out of the 1x8s as shown above.

Step 2

Adjust the bed frame for square and fasten the corner supports in the corners as shown above. Keep the top edges flush. This will be the bottom of your bed frame.

Step 3

Mark the end rails 30″ in and fasten the center support to the end rails using 2″ screws and glue or pocket holes from the inside. Keep top edges flush. This will be the bottom of the bed.

Step 4

Flip the bed frame over and mark the side rails down 2 inches on both sides. Attach the cleats with 2″ screws and glue, screwing every 6 to 8 inches.

Step 5

Step 6

Attaching the legs is easy. Simply line up the legs with the outside corners of the bed frame and screw through the corner supports into the top of the leg blocks. Use at least 2 screws. You could easily attach a different type of foot to the bed in the same manner.

Step 7

Lay your slats on top of the cleats and screw down. Also screw to the center support. Space slats approximately 4″ apart.

Preparation Instructions

Fill all holes with wood filler. Let dry completely and sand with coarse sand paper. Refill holes with filler, and let dry completely. Sand again, this time with medium grit sandpaper. Then sand with fine sandpaper. Vacuum with a soft bristled brush to remove any residue. Then wipe clean with a damp cloth. Let dry. Apply primer and paint for a painted finish, wood conditioner and stain for a stained finish. Finish with a clear coat if necessary. Of course you would have skipped all of these steps if you were using fabric.


Ruff Sawn Tahoe Turned Leg Bed

Ruff Sawn Tahoe Turned Leg Bed

View Our Entire Ruff Sawn Furniture Collection

Big, square legs, married to traditional bun feet, combined with the deep saw marks of the horizontal panels in the head and foot board, and a gracefully curved backdrop all come together to form a style that will provide the "wow-factor" into any bedroom space.

A little bit French Country, a little bit middle-of-the-woods-log-cabin, the Tahoe Turned Leg Bed throws out the rule book when it comes to bedroom design. From the pages of the fables your grandmother read to you as a child, to the heart of your bedroom suite, this bed is one that will give you butterflies every time you glance.

Why We Love It

Available in variety of sizes, you can customize this bed in a single or full size and make a cute space for the little ones. Or choose the King or Queen and add it to your own space. With the Tahoe Turned Leg Bed, there is not place where it won't be a welcomed sight. Choose from a variety of stains to get the perfect tone to complement your suite or add the matching nightstand, dresser, chest, and mirror and form your own collection that fits just right.

  1. Blue springs ranch campground map
  2. Commodore homes of pennsylvania
  3. Storage containers with drawers
  4. Taurus 44 mag revolver holster
  5. Macbook air 512gb 2020 price

Platform Bed With Turned Legs (Cherry)

Custom Made Platform Bed With Turned Legs (Cherry)

Platform Bed With Turned Legs (Cherry)

$3,+ / Ships in 4 weeks
  • Brandi S.

    Very happy with the custom designed newel post he made for my home in The shipping via a local UPS store was not sufficient as part of the product broke off but that was not Mr. Pinion fault and one of my carpenter's on the job fixed.

    I appreciated Mr. Pinion during the design process and he was right on schedule.

    I am a perfectionist and I can tell you his work is exceptional.

This kingsize platform bed is made of solid cherry hardwood. It has turned legs. All sizes are available and your choice of lumber and stain/finishes.

View Shipping & Maker Policies

No reviews yet

Each week, expert artisans from across the country become makers on CustomMade.

Every maker has a story. Be a part of Wm Pinion Fine Furniture's story by placing an order, leaving a review, and seeing your review appear here.

✅Bed Frame: Best Platform Bed Frame (Buying Guide)

Killed him. I dont know. I dont think so. Duvall lowered his eyes. I just stunned him.

With turned bed legs platform

I moved quickly between small groups of people of several people, until finally, having reached almost the end of the platform, I saw. Her. Dasha dressed in a checkered shirt with short sleeves, which was tied in a knot at the front. Under the shirt, I saw the girl's beautiful flat belly, topped with a neat little navel.

DIY Modern Plywood Platform Bed Part 1 : Frame \u0026 Nightstand Build - Woodworking

My wife was seriously drunk after such a brotherhood: after all, five full glasses of wine in a row is a serious dose. The boys who were no longer ashamed also got drunk, addressed my wife simply by name and behaved much more relaxed during the dances. At least, each of them considered it their duty to hug Katya's ass.

When she returned to the table, she was visibly shaking: - I was completely screwed up after your wine.

Now discussing:

Cool finished - he answered me. We shook hands and parted. Arriving home, I ran through everything that happened in my head and decided that it was really great.

752 753 754 755 756