2014 tundra oil filter location

The oil filter removes debris and contaminants from the oil before it is recirculated through the engine. An oil filter is a maintenance part that should be replaced at each oil change, but problems inside the engine or excess debris may clog it before your oil change interval. If your oil filter is clogged, you may notice a drop in oil pressure, sudden changes in oil consumption, or metallic sounds from the engine compartment. If you believe you need to replace your oil filter, or if it's time for your regular oil change, check out O’Reilly Auto Parts for the oil, oil filter, and other maintenance supplies you need for your car, truck, or SUV.

Sure, buying a brand-new truck like the 2017 Toyota Tundra is exciting. It provides excellent power, strong towing, off-road capabilities and lots of space and comfort. But just because it’s new and has a decreased risk of immediate problems, it doesn’t mean you don’t have to take care of it. So how do you take care of your pickup truck so it will stay in great working condition? The answer is with regular maintenance services. It may sound difficult, but one service that is rather basic is changing the oil. In fact, it is a maintenance service that can be done yourself. To learn how, check out the step-by-step guide below.

Gather tools and equipment. The first step in any DIY job is to gather the necessary tools and equipment. This way you will have all of the right pieces to get the job done quickly and correctly. Here’s what you’ll need:

Oil filter
Standard wrench
Filter wrench
Motor oil
Funnel
Blocks/wheel ramps

Warm the engine. In order to encourage buildup and sludge to move out of your engine easier during your oil change, let the engine run for about ten minutes. Then turn it off before starting the next step.

Raise your 2017 Toyota Tundra. Using blocks or wheel ramps, raise your truck and set the parking brake. This will secure your vehicle and allow you to slide beneath it so the oil can be changed.

Drain the oil. Once beneath your truck, place a pan or container underneath the oil drain plug, loosen its bolts with a standard wrench, and remove the drain plug. *Keep your hands and other vitals out of the stream of hot oil. Your oil should be fully drained within ten minutes.

Replace the oil pan. When oil has been drained, replace the drain plug and screw it back into place.

Locate the oil filter. Remove yourself from beneath your truck, pop the hood, and locate the oil filter. Use your owner’s manual for a proper visual description.

Change the oil. When you have located the oil filter, loosen it with an oil-filter wrench and remove it. Be careful not to drip oil. Once removed, replace it with a new one using your hand to tighten it. A filter wrench can be too forceful and cause the oil filter to be cracked. *It is also a good idea to rub oil on the new filter’s seal before installing it.

Add new oil. The last step is to add new oil to your truck. To do this, find the oil cap under your truck’s hood and unscrew it. Pour in fresh oil and replace the oil cap. Let the oil settle for a few minutes then check the oil level on your truck’s dip stick ensuring it falls between Low and Full.

For more information on the 2017 Toyota Tundra and all your maintenance needs, visit our dealership in Harrisburg, PA.

1. Getting Started - Prepare for the repair

2. Open the Hood - How to pop the hood and prop it open

3. Find Oil Drain - Locate the oil drain plug underneath the vehicle

4. Drain Oil - Set up the workspace, drain oil and replace plug

5. Find Oil Filter - Locate the oil filter

6. Remove Filter - Position drain pan and remove the oil filter

7. Replace Filter - Add oil to the new oil filter and insert it

8. Remove Oil Cap - Take off the oil fill cap

9. Add Oil - Determine the correct oil type and add oil

10. Replace Cap - Put the oil fill cap back on the engine

11. Leak Inspection - Start vehicle and visually inspect for leaks

12. Remove Dipstick - Locate, remove and wipe oil dipstick

13. Read Oil Level - Reinsert dipstick, remove and then read oil level

14. Clean Up Tips - How to best clean spills and deal with used oil

15. More Info. - Additional information on oil changes

Share on    

• Advance Auto coupon for
  20% off entire order: KIOSK20

We're offline for a tune-up, we'll be up and running smoothly very soon.

In the meantime, here are some other options available:

Visit an
Advance Auto Parts store

Sign up for
SpeedPerks Rewards

View us on Social Media
Facebook/Twitter/Blog

We appreciate your patience – on your next visit, use coupon code PS20 for 20% off your purchase.

We look forward to serving you,
The Advance Team