Gas logs ventless with remote

Match Light

This option is for natural gas only. There is no pilot, only the logs and burner. Your fire is lighted by placing a match or lighter near the burner, then turning on the gas with your key valve. You control your flame height using your key valve which is normally located outside the fireplace either in the wall or floor.

Manual Safety Pilot

This system has a safety pilot that is manually lighted and stays lit all the time. Also called a standing pilot, it is similar to a pilot found in a water heater. You can turn the burner on and off manually by reaching inside your fireplace and turning the control knob. You cannot operate this type of system with a remote control, however, you can upgrade later.

Remote Control

Remote Control systems include a remote pilot valve assembly. Depending on the remote option you select, you will have the ability to control certain functions of the log set from a remote control. Remote controlled options include basic on/off control as well as variable flame height control.

Showing 17–31 of 31 results

• 

  Lost River Ventless Dual Fuel Gas Log Set &#; 24&#; Split Bark, Thermostat Control &#; 32, BTU

  Model: PCILVFD24T-2

  $
• 

  18” Ventless Ambient Gas Log Set Natural Gas 30, BTU

  Model: VF18NA-2

  $
• 

  18&#; Ventless Liquid Propane Gas Log Set &#; 32, BTU

  Model: WZL18MVA

  $
• 

  18&#; Ventless Natural Gas Log Set &#; 32, BTU

  Model: WZN18MVA

  $
• 

  Procom Vent-Free Gas Log Heater 32,BTU Dual Fuel -NG / LP, Model# PCNSDS24RT

  Model: PCNSDS24RT

  $
• 

  Lost River Ventless Dual Fuel Gas Log Set &#; 24&#; Traditional Oak, Remote Control &#; 32, BTU

  Model: PCILVFD24RT-1

  $
• 

  Lost River Ventless Dual Fuel Gas Log Set &#; 24&#; Split Bark, Remote Control &#; 32, BTU

  Model: PCILVFD24RT-2

  $
• 

  18” Ventless Ambient Gas Log Set Liquid Propane &#; 28, BTU

  Model: VF18LA-2

  $
• 

  24” Ventless Ambient Gas Log Set Natural Gas &#; 37, BTU

  Model: VF24NA-2

  $
• 

  24” Ventless Ambient Gas Log Set Liquid Propane &#; 34, BTU

  Model: VF24LA-2

  $
• 

  24&#; Ventless Natural Gas Log Set &#; 34, BTU Milivolt Control

  Model: WZN24MVA

  $
• 

  24&#; Ventless Liquid Propane Gas Log Set &#; 34, BTU

  Model: WZL24MVA

  $
• 

  24&#; Gas Log Set Dual Fuel Technology &#; 32, BTU

  Model: PCNSD24M

  $
• 

  30&#; Ventless Liquid Propane Gas Log Set &#; 40, BTU

  Model: WZL30MVA

  $
• 

  30&#; Ventless Natural Gas Log Set &#; 40, BTU

  Model: WZN30MVA

  $

Ventless Gas Log Buyer's Guide

Duluth Forge Inch Vent-Free Fireplace with Mantel

Imagine trying to explain ventless gas logs to someone from the s. "You can turn the fire on and off with the push of a button or flip of a switch. There's no smoke, no ash, no chimneyand the logs last for years."

And that pretty much sums up why people convert to gas. A cozy fire may be timeless, but the hassle and risk of wood-burning fire is something many can live without!

It's a luxury, really. All the classic charm of flickering flames without cutting or buying firewood, cleaning chimneys and scooping ash. And if that's not enough, it's also safer and more heat-efficient. You don't even have to have a special fireplace. Most existing fireplaces can be converted to gas logs and ventless gas logs can be installed into purpose-built prefabricated fireplaces with no chimney.

We understand if you want to keep the nostalgic smell and crackle of your real wood logs. But for those who want warmth and flames without time-consuming maintenance and smoke, gas logs are an excellent choice.

There are a few different types to choose from, so we'll go over what's available and how you can install and use gas logs. We'll also throw in some maintenance tips and top brand recommendations so you'll be good to go.

What Are Gas Logs?

Empire Whiskey River Refractory Ventless Natural Gas Log Set

Gas logs are artificial wood logs designed for propane or natural gas fireplaces. They're made of ceramic fiber or refractory cement and come in several realistic "wood" varieties like classic oak or beachy driftwood. The main decision you'll need to make is whether you opt for a ventless or vented set.

To be clear, the gas fireplace logs themselves don't actually create any flames, they're just the decoration that makes the fireplace look more realistic. The actual flames come from a burner that ignites natural or propane gas.

It's usually convenient to use whatever type of gas you already have supplied to your home. For example, if your gas range already uses natural gas, you can opt to run a natural gas line to your fireplace. However, running a new line can be expensive and some homes do not have any gas supply at all. In that case, we recommend installing a small propane tank dedicated to supplying your fireplace with gas. You can go here to find more information about natural gas versus propane.

When purchasing fireplace logs, choose ones that are compatible with the type of gas you use. Although there usually isn't a difference in the actual logs, the burner and valve sets are different depending on whether you use natural gas or propane.

The major difference when it comes to gas logs is whether they are vented or ventless.

Duluth Forge Inch Vent-Free Zero Clearance Gas Fireplace with Mantel

Vented gas logs offer the most realistic flame pattern. The flames lick and cloak the logs like a real wood-burning fire. Unfortunately, there's a price to pay for those big, beautiful flames. Vented gas logs (as the name implies) require venting, so you'll need to have a fireplace with a functioning chimney. A good rule of thumb is that vented log sets can only be used in fireplaces that are capable of burning real wood logs. You can't use them in a direct vent or b-vent gas appliance.

The damper of the chimney must be open while the fireplace is in use and this lowers the heat efficiency of the fireplace. Even though you might still feel some cozy heat right next to the fire, it won't be very efficient at heating a larger room.

Ventless gas logs produce such minimal exhaust that they don't need a chimney. They are super heat efficient and are great for adding supplemental heat to your home.

But yes, there's a catch. Part of the reason ventless gas fireplace logs can get by without a chimney is that the flames never actually touch the logs. This lowers the amount of exhaust created, but it also makes the fire look less realistic. Instead of touching the logs, the flame is directed to purpose-built void areas between them. Manufacturers design the log sets and flame cutouts so that it tricks your eyes into thinking that the logs are burning realistically, but the flame aesthetic often isn't quite as good.

Empire Rock Creek Refractory Ventless Gas Log Set (side view)

One other aspect is the difference between how the logs are positioned. Many vented log sets can be arranged in your fireplace in a number of configurations (as long as they have the right airflow and aren't blocking the gas burner). Vent free gas log sets usually have recesses, locating pins, or valleys that ensure they are set up in only one configuration. If you're very particular about arranging logs yourself, you might want to go with the more customizable option.

So there you have it. If you want a fire mostly for the visual appeal (and the option of an extra cozy seat right next to the fire), then vented is the way to go. However, if you want more even, efficient heat, or don't have a chimney option, ventless logs rise to the occasion.

What Are Gas Fire Logs Made Of?

Gas logs are made by pouring concrete or ceramic into log-shaped molds. These fire-resistant "logs" are then painted to look like real wood. Note that gas logs are different from consumable fake logs designed to burn in a non-gas fireplace. The consumable fake logs are made from material like compressed sawdust or coffee grounds and substitute for wood.

Hot molten metal gas log production

Why Consider Gas Logs?

The main advantage of gas logs is their convenience and heat efficiency. The whole idea of no ashes to clean or wood to cut is quite appealing! And the designs are more and more realistic, making even diehard wood-burning fans take a second look.

Real wood fireplaces are charming, sure. But they're not always practical. Perhaps you want a fireplace in a room that doesn't have a chimney. Or maybe you're hoping for a fireplace that will function as a reliable and efficient heat source. Maybe you're just tired of gathering wood and cleaning ashes. Gas logs are the perfect solution for someone who wants a blazing fireplace without the downsides.

It's also a safer option. Wood-burning fireplaces tend to be a little less predictable and have fewer built-in safety checks. Gas fireplaces offer more control over the flame height and can't send sparks or embers flying into the room. Most gas models are also equipped with several sensors and safety shut-offs that keep the gas from escaping or the fire from getting out of control.

Breck peninsula ventless gas firebox

Once you switch to gas, you can choose from a wide array of log styles in different colors, styles, and sizes. The logs themselves become a sort of accessory, allowing you to add extra personality and style to your fireplace.

Leading Brands and Manufacturers

Ready to start the search for gas logs? Here are some tried and true brands to get you started. Whether you're looking for vented or ventless, propane or natural gas, these companies make quality logs sets in an array of styles.

• RealFyre - RealFyre has been in the gas fireplace business for more than 65 years. They offer several lovely, realistic log sets in both vented and vent-free. They also have a selection of glass fire media for a more modern look.
• Monessen - Monessen is an industry leader in vent-free gas products. Some of their logs sets may be a bit pricier, but they are durable and each is hand-painted with exquisite attention to detail. Monessen also makes a priority in promoting environmentally-friendly practices.
• EverWarm - EverWarm offers a quality selection of both vented and vent free gas logs. Their popular oak sets come in several sizes to fit a range of fireplaces.

How Do Gas Logs Compare to Real Wood?

Besides the obvious difference that gas logs are fake and don't degrade, there are several other differences between real wood and gas log fires. (For example, gas logs don't bring along spiders.) Here is a quick glance at the differences:

• Gas logs can be reused year after year.
• Gas logs don't burn down and shift or roll in the fireplace.
• Gas logs don't smoke like real wood logs.
• Unlike real wood, gas logs "ignite" immediately into full flame.

How to Measure for Gas Logs

Measuring and selecting the right size logs is crucial. Overly large logs will negatively impact the function of the fireplace, while logs that are too small will look strange. Remember that you also have to leave room for the burner and ignition components. Here are some basic guidelines. (You can also use our gas log calculator.)

Start by taking measurements of the inside of your fireplace. (Note that you should round down to the nearest whole number. It also helps to clear out any old logs or grates to have space to measure.)

1. Measure the width of the front fireplace opening.
2. Measure the width at the very back of the fireplace.
3. Measure the depth from the back to the front.

Watch the video below for a demonstration:

Now that you have the basic measurements, you have a general idea of what logs will fit. However, each log set is different and you should check the specific space requirements before purchasing.

Different ignition types also affect the size of logs your fireplace will accommodate.

• Manual gas valve ignition doesn't include a pilot kit. As a general rule, you only need 2 inches of clearance between the burner and the side of the fireplace. Subtract 4 inches from the front width measurement and you'll have the length of logs your fireplace will fit.
• Safety pilot ignition systems require some space for the pilot light. In general, subtract 8 inches from the front width measurement to find the length of logs that will fit.
• Millivolt pilot ignition or intermittent pilot ignition includes hardware for remote control. This means you'll need about 6 inches of clearance on either side. Subtract 12 inches from the front width measurement to find the optimal log size for your unit.

How Do Gas Logs Work?

The purpose of gas logs is mainly for decoration, although their arrangement does affect airflow. In a gas fireplace, the gas (either liquid propane or natural gas) is connected to a burner that has ports for the gas to flow through. The gas is lit by an ignition system, causing flames to spring up around the logs.

There are three main types of ignition systems for gas log fireplaces:

Manual On/Off Valve

This ignition system works by turning on the gas valve and lighting the stream of gas by hand. The flame height can then be adjusted by turning the valve supply up or down. This system is simple and inexpensive, but it is also more dangerous since the gas could be accidentally left on. Note that manual valves are not allowed for liquid propane or ventless fireplaces.

Manual Safety Pilot Valve

The pilot light on these systems is a tiny flame that continues burning even when the unit is not in use. The flame is fed by a tiny stream of gas and is ready to light the rest of the burner ports whenever the main gas valve is turned on. This method is an added safety feature because the pilot prevents gas from leaking into the home unnoticed. It will ignite and burn any gas coming from the burner ports. It also makes it easy to ignite the main flames with the push of a button or switch. In the offseason, the gas can be shut off completely and the pilot light extinguished.

Millivolt (Remote Ready) Pilot Valve

These systems are similar to the manual pilot valves, but they have the option of incorporating a remote control. The downside is that the systems tend to be more expensive and take up more space in the firebox.

No matter which ignition system you use, the basic function of the fireplace is the same. The valve controls the gas flow and the burner directs the gas through ports. The gas is lit by a pilot light or handheld lighter and creates flames.

How To Install Gas Logs

If you're installing a new gas fireplace, you'll need to have a gas line professionally installed. Turn the gas valve completely off before you start the installation. If you're replacing a gas log set, remove the old logs and disconnect the burner from the gas line. Hook up the new burner and arrange the logs according to the instructions.

Framing and installing a built-in ventless gas fireplace

If your burner comes with electrical components for remote control, you can connect these before arranging the logs. The burner often attaches to the bottom of the fireplace with screws. Your model should come with specific information on how to attach it.

Gas logs often come with a metal grate that sits over the burner and contains the logs. Ventless logs must be arranged in a specific pattern so that the flames won't touch the logs. Usually, there are pegs in the grate that the logs slide on to. The instructions will come with explanations or diagrams to show you how to arrange the logs.

Vented logs don't require a specific arrangement. Just keep in mind that you want to leave room for some airflow and not block the burner ports. Wear gloves when arranging the logs since fiberglass can cause skin irritation.

In addition to the logs, you might want to consider other accessories like fake charred coal or pieces that look like glowing embers. All of these accessories are non-combustible and you can buy them in kits.

How to Light Gas Logs

For a gas fireplace without a pilot light, turn on the gas valve and light the gas using a long-stemmed lighter. Follow the proper safety precautions to avoid releasing too much gas or getting burned. If your unit comes with a pilot light it will need to be lit before the first use.

Lit gas pilot

Some pilot lights are lit by pushing an ignition button on the control panel of the fireplace. Other models require you to light the pilot with a match. In any case, read the instructions for your specific model to know exactly how to light the pilot. Once the pilot stays lit on its own, you can turn the knob on the fireplace from "pilot" mode to "on" and ignite the main burner flames.

The pilot light should stay lit throughout the burn season. Once the pilot is lit, you can turn the main flames on and off with a button to operate the fireplace.

If you don't have a safety pilot light, it's important to light the gas immediately after you open the gas valve. If it fails to ignite, turn off the valve and wait several minutes for the gas to dissipate before trying again. If it still does not light after several attempts, turn off the valve and call the manufacturer for help troubleshooting the problem.

How to Clean Gas Logs

Gas logs are delightfully low maintenance, but they still need some cleaning from time to time. Each set is different, so follow the guidelines given by the manufacturer. To clean, shut off the pilot light and allow the logs to cool completely. You can use compressed air, a soft brush, or a vacuum to remove dust and soot.

Woman with yellow rubber gloves holding a cleaning cloth

Sometimes it's helpful to remove the logs to clean them. If you have ventless logs, make sure you know the exact arrangement of the logs before you take them apart. You can even snap a photo if you don't have the manual handy. Putting them back in the wrong orientation can void the warranty.

Use gloves to handle the logs and place them gently on top of some newspaper. Don't use water or any cleaner unless the manual specifically says to. Instead, use a dry rag, vacuum, or soft brush. Be careful to not scratch or chip the paint on the logs.

Shipping

Most gas logs and burner sets will ship via small parcel post. Log sets over 36 inches can easily weigh over pounds and will be shipped on a pallet to protect them from breaking. The pallets will ship via freight.

For vent-free gas log sets, the burner and gas valve are factory assembled and shipped in one package. Vented gas logs that are non-ANSI certified are usually not factory assembled. In that case, the burner and gas valve will arrive in separate packages.

Always check any shipment for damaged or missing pieces. Contact the manufacturer immediately and do not sign off on any delivery if you notice the damage.

Summary

Kingsman Zero Clearance Vent Free Gas Fireplace

It's no wonder gas logs have become so popular. They let you add ambiance and warmth without the extra commitment of maintaining a wood-burning fireplace. Start by deciding whether you want to go with vent-free or vented logs. Then you can measure your fireplace and start browsing through all of the beautiful log options!

And as always, our NFI Technicians are here to help if you have any questions!