2004 gmc envoy key fob

2004 gmc envoy key fob DEFAULT

2004 GMC Envoy Keyless Entry Remote

PART SKU: GM-MYT3X6898B

  • One 2004 GMC Envoy Keyless Entry Remote - new condition (original GM board in an aftermarket case - NO logo).

  • DIY programming instructions are free and included with the purchase. You can program this key fob by yourself after you receive it (click on Programming Video below to watch how it's done).

  • This transmitter will work on vehicles equipped with turn-the-key ignition and standard keyless entry system.

  • Price above is quoted for one replacement keyless entry unit.

More Information:
  • GM Part Numbers: 15051014, 15008008, 15008009
  • FCC ID: MYT3X6898B
  • Frequency: 315 MHz
  • Battery: CR2032
  • Reusable: Yes
  • On Board Programming: Yes
  • 3 Buttons: Lock, Unlock, Panic alarm

This remote also fits:

04 05 06 07 Buick Rainier
02 03 04 05 06 07 08 09 Chevrolet Trailblazer
02 03 04 05 06 07 08 09 GMC Envoy
03 04 05 06 07 08 Isuzu Ascender
02 03 04 Oldsmobile Bravada
  • One new GM remote (picture may show FRONT and BACK of the same key fob)
  • Free do it yourself programming instructions
  • All transmitters include a battery
  • All units are tested before we ship
  • 90 days 100% satisfaction guarantee and warranty, money back / return policy included
  • 1, 2 or 3 year Extended Warranty / accidental protection can be purchased at additional cost
Sours: https://www.carandtruckremotes.com/2004-gmc-envoy-remote.html

2004 GMC Envoy Remote Programming

Note: All existing transmitters will need to be reprogrammed during this procedure M

1. Close all vehicle doors.
2. Insert key into ignition
3. Hold down the UNLOCK button on the driver side door panel. Continue to hold down until instructed to release in step 9.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (do not crank the engine)
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position ( do not crank the engine).
8. Turn the ignition switch to the OFF position.
9. Release the unlock button on the door panel. The vehicle should lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the doors lock and unlock to confirm programming. – (You may need to hold LOCK & UNLOCK for up to 30 seconds.)
11. Repeat step 10 for each additional transmitter (including any preexisting transmitters).
12. Turn the ignition switch to the ON position to exit the transmitter programming mode.

2015-09-24

Keyfobprogram

Sours: https://www.keyfobprogram.com/2004-gmc-envoy-remote-programming/
  1. Tacoma with 4runner limited wheels
  2. Arctic king freezer replacement parts
  3. Troll co clothing discount code

2004 - 2006 OEM GMC Envoy XUV 4 Button Remote w/ Rear Glass - MYT3X6898B

Programming Instructions
  1. Close all doors
  2. Insert key into ignition
  3. Hold down the power UNLOCK button on the driver's door panel, continue to hold down until instructed to release in step 9.
  4. Perform steps 5 through 8 in a fairly rapid succession.
  5. Turn the ignition to the ON position (as far as you can go without starting the engine.)
  6. Turn the ignition to the OFF position.
  7. Turn the ignition to the ON position (as far as you can go without starting the engine.)
  8. Turn the ignition to the OFF position.
  9. Release the power UNLOCK button on the door panel. The vehicle should respond by door locks locking and unlocking automatically. (If locks do not cycle after you let go, not before you let go of the unlock button, then the vehicle has not entered programmingmode and you must start procedure over. Remove key from ignition, open drivers door and return to step 1 ). If the locks do cycle automatically then proceed to step 10.
  10. Hold down the LOCK and UNLOCK buttons on the remote until the doors lock and unlock. This may take up to 30 seconds.
  11. Repeat step 10 NOW for each additional remote. (Including any existing remotes).
  12. Turn the ignition to the ON position to exit the programming mode.
  13. Test remote(s).
Sours: https://replacemyremote.com/2004-2006-gmc-envoy-xuv-4-button-remote-w-rear-glass-myt3x6898b.html
2003 GMC Envoy - Pt2 program new door lock remote - auto repair diy trailblazer raineer 4.2l 4x4 suv

2004 GMC Envoy Key and Remote Pairing Instructions



Remote Pairing : Instructions

1998 - 2009 Chevrolet, GMC, Hummer, Oldsmobile Vehicles Remote Programming Instructions (Select Models: See Attached List)

NOTE: Verify your vehicle's year, make, and model are on the attached list of compatible vehicles before attempting these programming steps. 

  1. Enter the vehicle and close all doors. 
  2. Insert the key into the ignition.
  3. Press and hold down the power UNLOCK button on the driver’s door panel until instructed to release it in step 8.
  4. Perform steps 5 through 8 in a fairly rapid succession.
  5. Turn the ignition to the ON position (as far as you can go without starting the engine).
  6. Turn the ignition to the OFF position.
  7. Turn the ignition to the ON position.
  8. Turn the ignition to the OFF position.
  9. Release the power UNLOCK button on the driver’s door panel. The door locks should lock and unlock automatically, indicating the vehicle is in pairing mode. If the locks do not cycle, the vehicle has not entered pairing mode, and you must start over. Remove the key from ignition, open the driver’s door, and return to step 1.
  10. Hold down the LOCK and UNLOCK buttons on the remote until the doors lock and unlock. This may take up to 30 seconds.
  11. Repeat step 9 for any additional remotes, including any existing remotes.
  12. Turn the ignition to the ON position to exit pairing mode.
  13. Test all remotes

SKU: GM 660



View full instructions here.

Keyless Entry Car Remote - 3 Button


Sours: https://carkeysexpress.com/store/manual/GMC/Envoy/2004/1000144-keyless-entry-car-remote-3-button

Key envoy 2004 fob gmc

2004 GMC Envoy XUV - Keyless Entry/Alarm Remote Transmitter

Most newer vehicles are equipped with keyless entry. This system uses a remote to lock or unlock your vehicle's power locks. These remotes may also include an alarm button and other button commands. The keyless entry remote may be built into your key fob, or it may be a separate unit. The plastic case of your keyless entry remote is easy to damage, but the case can sometimes be replaced. If you've lost your remote, complete remotes that can be programmed to the vehicle are also available. If you need a keyless entry remote fob replacement, or a complete remote, browse O'Reilly Auto Parts and check out our remote options. We carry keyless entry remotes, remote cases replacements, and replacement batteries for all of your keyless entry needs.

Show More Show Less
1 - 4 of 4 results for Keyless Entry/Alarm Remote Transmitter
Sours: https://www.oreillyauto.com/shop/b/lighting---electrical-16777/keyless-entry-alarm-remote-transmitter-13308/b127bd19ad60/2004/gmc/envoy-xuv
2015+ Style Chrome Key Fob Programming Guide for 2002-2009 GM Trailblazer \u0026 Envoy - Boost Auto Parts

Easy to Follow Step-by-step Key fob remote Programming Instructions

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2004 GMC Envoy


Time needed: 5 minutes.



  1. Close All Doors

    CLOSE all doors.

  2. Enter Programming Mode – Step 1

    INSERT key into the Ignition (DO NOT TURN).

  3. Enter Programming Mode – Step 2

    PRESS and HOLD the power UNLOCK button on the Driver’s side door. DO NOT release until instructed.

  4. Enter Programming Mode – Step 3

    TURN the Ignition ON, OFF, ON, OFF

    (ON is the position just shy of cranking the engine and OFF is where you can remove your key).

  5. Enter Programming Mode – Step 4

    RELEASE the power UNLOCK button on the Driver’s side door.

    Upon release of the UNLOCK button, the vehicle should respond by cycling the door locks LOCK / UNLOCK signaling successful entry into Programming Mode.

    a. IF the door locks cycle, continue to Step 6. If the door locks cycle BEFORE releasing the UNLOCK button, the vehicle has NOT entered Programming Mode and you must RETURN to Step 1.
    b. IF the door locks continue to cycle BEFORE releasing the UNLOCK button, there is a problem with the vehicle’s keyless entry system and the remotes must be programmed by a certified professional Automotive Locksmith or Dealer.
    c. IF you are unable to get the door locks to cycle at all, you are turning the key too quick or too slow, there is a problem with your vehicle’s keyless entry system, or the vehicle is not equipped with keyless entry. Check with a certified professional Automotive Locksmith or Dealer.

  6. Program Remote

    HOLD the LOCK and UNLOCK buttons on the remote at the same time, up to 30 seconds, until door locks cycle LOCK / UNLOCK to signal successful programming of the remote.

  7. Program Additional Remotes

    REPEAT Step 6 for any additional remotes to be programmed, including working ones.

  8. Exit Programming Mode

    TURN ignition to ON to EXIT Programming Mode.

  9. Finalize Programming

    TURN Ignition to OFF and remove key to finalize programming.

  10. Test Remotes

    TEST all remotes. Programming is complete.

  11. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.
  • You may clear your keyless entry system memory by entering programming mode as shown in the steps above.

If you have any difficulties with programming your vehicles, contact us at [email protected].

MONEY BACK GUARANTEE

We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.

FAST & FREE SHIPPING

ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!

CUSTOMER SUPPORT

Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.

SAVE 70% OVER DEALERSHIPS

We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!

NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.
This entry was posted in Free Programming Instructions, GMC Programming and tagged 2004, Envoy, GMC. Sours: https://northcoastkeyless.com/2004-gmc-envoy-keyless-entry-remote-fob-programming-instructions/

Similar news:

The clitoris protruded slightly more between the lips, and the lips themselves were slightly red. Licking his clitoris softly, he did not feel any foreign aftertaste. The pussy was sweet as always.



2037 2038 2039 2040 2041