Cadillac CTS 2008-UP Full Set Interior BD Dash Trim Kit
The installation process requires certain patience and attention to details, so please, read this instruction carefully before installing your dash kit. This guide includes installation instruction for both molded (3D) dash kits.
STEP 1: Surface cleaning
Before applying dash kit elements you need to clean the area of application in order to remove all silicone residue.
Apply some wax and grease remover to a cotton cloth and thoroughly wipe the surface. Wax & Grease Remover can be purchased in any auto parts and accessories store.
Do not use any lacquer thinner as it will damage the surface of your dashboard.
Repeat the cleaning process several times until all silicon is removed. To test whether the surface is ready for the next step, apply a strip of insulating tape. If tape sticks to the surface and makes a “ripping” sound when pulled off, proceed to the next step. If the tape peels off without resistance, repeat the cleaning procedure.
Clean the surface with isopropyl alcohol. Avoid applying alcohol to any clear plastic surfaces including gauges, clocks, radios or warning lights. The surface where your new dash kit will be installed must be clean of dirt, wax, silicon, grease etc. Otherwise kit pieces may not adhere properly. Repeat tape test until you are satisfied with result.
STEP 2: Dry fitting
Make sure that all pieces fit designed place without removing the backing from the part. Hold the piece where it is supposed to be installed and make sure that all buttons and switches are accessible and move freely. If any component doesn’t fit its place, contact your store's customer support as soon as possible.
STEP 3: Installation
Most of the components that install on flat or horizontal surfaces can be installed with the adhesive, that is already applied at the part by the manufacturer. However, installation of narrow components, corners, pieces that are installed on vertical surfaces require an adhesive promoter.
Start with the pieces that can be installed without adhesive promoter. Peel off the backing to expose the adhesive. Place the component to its place and press down lightly with your fingers. If the component is installed properly, apply pressure using a soft clean cloth. Proceed with pieces that can be installed without using adhesive promoter.
Big 3D components should be installed from side-to-side or top-to-bottom. Finally, use hair dryer to warm each piece and re-apply pressure.
STEP 4: Installing 3D pieces
Define the order of installation for the remaining 3D components.
Wear rubber gloves when using an adhesive promoter. Don't let it contact any surface that will not be covered by your dash kits, as adhesive promoter discolors everything it contacts.
Start applying adhesive promoter to such areas, as corners, around air vents, narrow areas, vertical and down facing surfaces. After 5 minutes start applying first pieces in the order you've determined before. Once you are satisfied with the placement of a component, apply pressure to the entire part surface using a soft cloth. Try to complete installation within 20 minutes.
STEP 5: Installing 3D pieces
Make sure, that 3D pieces of your dash kit are undamaged. Then carefully peel off the backing from all 3D component and place them face down to the soft surface. Mist the trim piece adhesive surfaces with the "dash spray" supplied with the dash kit. Place each 3D part to its position. Gently press down.
STEP 6: Final touches
Once all pieces are installed, inspect the carefully to make sure that your dash kit is installed properly.
It takes 72 hours for the adhesive to fully cure. During which time the dash trim pieces should not be tampered with. After 72 hours remove finger prints and smudges using soft, dry cloth.
Cadillac CTS 2008 - 2013 Dash Trim Kit
Personal identification information
We may collect personal identification information from Users in a variety of ways, including, but not limited to, when Users visit our site, register on the site, place an order, fill out a form, respond to a survey, and in connection with other activities, services, features or resources we make available on our Site.Users may be asked for, as appropriate, name, email address, mailing address, phone number. Users may, however, visit our Site anonymously. We will collect personal identification information from Users only if they voluntarily submit such information to us. Users can always refuse to supply personally identification information, except that it may prevent them from engaging in certain Site related activities.
Non-personal identification information
We may collect non-personal identification information about Users whenever they interact with our Site. Non-personal identification information may include the browser name, the type of computer and technical information about Users means of connection to our Site, such as the operating system and the Internet service providers utilized and other similar information.
Web browser cookies
How we use collected information
BDTrims may collect and use Users personal information for the following purposes:
- To run and operate our Site
We may need your information display content on the Site correctly.
- To improve customer service
Information you provide helps us respond to your customer service requests and support needs more efficiently.
- To personalize user experience
We may use information in the aggregate to understand how our Users as a group use the services and resources provided on our Site.
- To improve our Site
We may use feedback you provide to improve our products and services.
- To process payments
We may use the information Users provide about themselves when placing an order only to provide service to that order. We do not share this information with outside parties except to the extent necessary to provide the service.
- To run a promotion, contest, survey or other Site feature
To send Users information they agreed to receive about topics we think will be of interest to them.
- To send periodic emails
We may use the email address to send User information and updates pertaining to their order. It may also be used to respond to their inquiries, questions, and/or other requests.
How we protect your information
We adopt appropriate data collection, storage and processing practices and security measures to protect against unauthorized access, alteration, disclosure or destruction of your personal information, username, password, transaction information and data stored on our Site.
Sharing your personal information
We do not sell, trade, or rent Users personal identification information to others. We may share generic aggregated demographic information not linked to any personal identification information regarding visitors and users with our business partners, trusted affiliates and advertisers for the purposes outlined above.
If User decides to opt-in to our mailing list, they will receive emails that may include company news, updates, related product or service information, etc. If at any time the User would like to unsubscribe from receiving future emails, we include detailed unsubscribe instructions at the bottom of each email or User may contact us via our Site.
Third party websites
Users may find advertising or other content on our Site that link to the sites and services of our partners, suppliers, advertisers, sponsors, licencors and other third parties. We do not control the content or links that appear on these sites and are not responsible for the practices employed by websites linked to or from our Site. In addition, these sites or services, including their content and links, may be constantly changing. These sites and services may have their own privacy policies and customer service policies. Browsing and interaction on any other website, including websites which have a link to our Site, is subject to that website's own terms and policies.
Your acceptance of these terms
By using this Site, you signify your acceptance of this policy. If you do not agree to this policy, please do not use our Site. Your continued use of the Site following the posting of changes to this policy will be deemed your acceptance of those changes.
This document was last updated on July 26, 2015
- 2016 jetta cabin air filter
- Liberty health sciences the villages
- Samsung curved monitor screen replacement
Metra 99-3018S Single or Double DIN Radio Installation kit for 2008 - 2015 Cadillac CTS
Car stereo installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Stereo Installation Basics
Let's start with the basics of replacing your car stereo receiver. In out first video we demonstrate how to crimp or solder your wiring, mount your new receiver to your dash kit and prepare everything for an installation in your vehicle.
Wiring Harnesses Explained
What do all of the wire colors mean? Aftermarket manufacturers have made car stereo receiver installation an easier process by using a standardized wire color scheme. We walk you through what each individual wire does, this way if you have an installation that doesn't perform properly you will have the resources to begin troubleshooting your installation.
Metra 99-3018S Single DIN / Double DIN Dash Kit (silver) for Cadillac CTS (2008-2014)
This Facia enables the easy change of the factory radios / navigation system to a car radio, navigation system or moniceiver from a manufacturer of retrofit equipment such as Alpine, Becker, Blaupunkt, Clarion, JVC, Kenwood, Pioneer, Sony.
Fits devices size standard: 1-DIN, 1-ISO, 2-DIN, 2-ISO
Original factory radios / navigation systems often have a vehicle-specific shape, therefore no standard DIN or double DIN/ISO radio fits into the existing radio slot. With the help of this Facia the change of the car radio is possible and the installation is done in a short time.
|Suitable for installing ...||aftermarket equipment manufacturers such as:|
Further features at a glance:
- With this complete set you keep the full functionality of even after the radio change:
- RAP (retained accessory power)
- NAV output (parking brake, reverse, and speed sense)
- Balance and fade
- With high level speaker input
Kit 2008 dash cadillac cts
The seed into a blank one, but that was Shetesh. Taking his penis into her mouth, she did not notice the demonic light flaring up in the dragon's eyes. According to the rule, not even a. Symbol (since not all demons followed it), after that he will have an individual right to it, which can only be challenged in an equal fight, and since he has no equal, then you can relax, which he did.
Tiirit did not understand why she was so attracted to the penis, she could not resist this, and most importantly she did not want to.Cadillac CTS Apple CarPlay - How To Add Apple CarPlay Android Auto to Cadillac CTS HDMI DVD TV Input
So will you leave. - Tell me why. I'm leaving. Mom blushes again and finds words with difficulty.
- Associate clinical trial manager salary
- 2008 mustang gt door panels
- John deere 425 carburetor diagram
- Bank of america mckinney hours
- Macbook pro vertical dock
- Verbs starting with a
- All crimson agate locations
- Les schwab tire center
- Used macbook pro 16gb ram
- The cold war quizlet
- 5 gallon square fabric pots
- Weather guard defender vs regular
- La santa muerte oraciones poderosas
Liana shouted indignantly. - I told you, pack your things. Are you going to rot in this hole and poverty for life. Enough. I have already doomed your late mother to such a life, but I do not want you to live like that.