Porter cable cordless belt sander

Porter cable cordless belt sander DEFAULT

New Porter Cable Cordless Sander

We’ve had this discussion before. On the one hand it would be nice if there were standardization of battery voltages and interfaces much like there is with most nations specifications for the acceptable ranges on AC voltage and frequency – plus standards for plug and receptacle configurations. Battery power gets complicated because cell chemistry, number of cells and configuration sets the voltage. The underlying battery chemistry has changed form NiCad to NiMh to LiIon – and may change again if advances are made. Perhaps because of this state of flux , or because cordless power tools are by no means as widely used as mains-powered electric devices (e.g. lights and appliances) I know of no government or standards organization worldwide that has found a compelling reason to set cordless battery/interface standards. So this is an area where free trade and choice (or confusion depending on your view of things) abounds.

This might actually encourage tool companies to innovate. That might result form their trying to garner market share by promoting their tool batteries, chargers and interfaces as different (larger, smaller, lighter, smarter, more powerful, longer lasting, faster charging, backward compatible, safer or anything else they can think of) than their competition. All of this could have an impact on first time buyers or newly formed businesses. But for those already invested in lots of cordless tools – jumping ship is a tad more difficult. With original equipment batteries priced so high, and aftermarket batteries still of dubious quality or cost/benefit, we have observed a desire on the part of tool buyers to pick a battery platform and then stick with it. That spreads the cost of battery ownership over a larger stable of tools.

This form of brand-loyalty has not been lost on the tool companies They, therefore, would seem to have no incentive to come together (if they even could without violating some restraint of trade ordinance) to standardize things.

Sours: https://toolguyd.com/porter-cable-cordless-sander-pccw205b/

Porter Cable 352VS 3" x 21" 8 Amp Variable Speed Belt Sander - Gray

Product Identifiers

  • brand


  • MPN


  • GTIN

    0696337656159, 0039404111487

  • Model


  • eBay Product ID (ePID)


Product Key Features

  • Power Source

    Corded Electric

  • Type

    Belt Sander

  • Battery Included


  • Color



  • Width


  • Length

    12.5in., 12.5 inches

  • Weight

    10.75 pounds, 10.75lbs.

  • Height

    10.38in., 10.38 inches

Additional Product Features

  • Origin

    U.S. and CA

  • Bottoms Size (Women's)

    3" x 21"

  • Size

    3" x 21"

  • Custom Bundle


  • Belt width


  • US Shoe Size (Men's)

    3" x 21"

  • Amperage


  • US Shoe Size (Women's)

    3" x 21"

  • Power Type

    Air Powered

  • Paper Type


  • Minimum SPEED (ft./min.)


  • Battery Type

    Does Not Contain a Battery, Other

  • Edition

    Tools & Home Improvement

  • Unit Sold

    1 Each

  • Max. Torque


  • Maximum speed (ft./min.)


  • Number of Tools


  • Tools Product Type

    Power Tool

  • Intimates & Sleep Size (Women's)

    3" x 21"

  • Item Package Quantity


  • Style


  • Speed (Surface feet / Orbits per minute)


  • Usage


  • Product Width (in.)

    5.75 in.

  • Chuck Key


  • Dimensions

    L 15.7 X w 8.9 X H 8.2in.

  • Switch Type

    Variable SPEED Dial

  • Minimum FPM (Feet)


  • Frequency


  • Product Height (in.)

    10.38 in

  • Power Tool Features

    No Tool Belt Change,TWO Hand Grips,Variable SPEED

  • Maximum FPM (Feet)


  • Power

    120VAC,25-60 HZ

  • Country of Origin CODE

    United States of America

  • Product Weight (lb.)


  • Corded/Cordless


  • Belt Size

    3 inches x 21 inches

  • Wheel Diameter

    5.75 inches

  • Media

    Tools & Home Improvement

  • Dia. (In.)


  • Cord Length (ft.)


  • Product Type

    Power Belt & Disc Sanders

  • Certifications and Listings

    1-UL Listed,ETL Listed

  • SFPM


  • Weight (lbs)


  • Gross Weight


  • Case Type

    No Case Included

  • Measurement System


  • Bottoms Size (Men's)

    3" x 21"

  • Includes

    Ul, CSA

  • Voltage


  • Features


  • Maximum Sanding Speed

    850 to 1300 SFM

  • Material


  • Sub-Type

    Air Powered

Sours: https://www.ebay.com/p/24032704115
  1. 45 river drive jersey city
  2. Stihl chainsaw sizes and prices
  3. 2010 mustang gt spark plugs
  4. Science book class 7 ncert
  5. Paws and pals dog crate

PORTER-CABLE 352VS vs WEN 6502T Belt Sander | Ultimate Battle

Belt sanders are probably one of the most beneficial power tools for many woodworkers out there. You see, sanding is famous for being a boring part of woodworking because it usually takes a lot of time.

However, acquiring the appropriate tool such as a belt sander can make the job more interesting. For the most part, a belt sander is a tool that is particularly made to make sanding rather easy and quick. It doesn’t really matter what the sanding surface is, belt sanders will be able to support you in smoothing and preparing the wood surface for the next process.

Now, you don’t need to do the research for the best belt sanders out there, because we did the hard work ourselves. So, without further ado, let’s evaluate the best belt sanders you can today!

Table of Contents:

Quick Summary

First and foremost, the Porter-Cable 352Vs is quite unique because of its solid and all-metal body. You see, a lot of belt sanders nowadays are incorporated with reinforced plastic, which is most of the time, not durable.

And because this unit is incorporated with metal, it is basically protected from different elements that can deteriorate the tool. Moreover, it comes with a durable exterior that makes it hard to damage.

On the other hand, the Wen 6502T is a perfect addition if you already have a tool collection because it comes with two tools in one big tool. It has a 4” x 36” belt sander and a 6” x 6” disc.

Its belt can tilt from 0 to 90 degrees which is perfect for various kinds of wood working tasks out there because it get rids of any awkward work. Its disc on the other hand is constructed along with cast Aluminum worktable that ensures that you’ll sand safely and accurately.

Who Should Get This?

A belt sander is a very versatile tool. Belt sanders are usually used for freehand shaping and rounding, levelling certain surfaces, sanding rough surfaces, and even trimming to a scribed line. Also, because they pack a good amount of power and can manage most rough grits, belt sanders are good at rapid removal of wood.

Moreover, compared to an orbital and vibrating sander, the sanding action of a belt sander is linear. That’s why even with rough grits, you can sand with the grain and still have a nice output. Even though belt sanders are not really categorized as essential in many household owners’ tool collection, you’ll find a lot of carpenters and experienced do-it-yourself enthusiasts having one.

Let’s take a look at the main factors you need to consider when purchasing a belt sander.


When looking for a decent power tool, one of the most crucial aspects that you must consider is of course, the weight. For a belt sander, this factor is crucial because it determines the overall ease of use and convenience of the tool. If most of your tasks require you to use the tool at horizontal orientations when performing a lot of misaligned boards, then having a heavier belt sander will be very advantageous. On the other hand, a lighter unit will be perfect for vertical sanding.

Maximum Comfort and Control

A belt sander comes with a must-have parts that enable you to effectively control as you slide the sander through the surface you are doing the work on. To be exact, this is where the handle of the tool becomes very convenient. Now, when looking for a belt sander, don’t forget to get one with a good handle. Get one that has optimal grip and fit for your hands.

Dust Extraction

For all we know, dust is natural product produce from sanding wood and certain materials. Dust can get into our eyes or we might breathe it in. Because of this, we highly suggest that you get a belt sander that can extract dust.

Width and Length

These two factors are two of the most crucial factors when picking the best belt sanders. You see, the wider and longer the belt is, the faster you can get things done since you’ll only need a shorter sanding pass. However, if you’re assigned to a task that requires greater accuracy, then try to go for a narrower and shorter belt.

Speed Settings

Even though belt sanders that are powerful can get your work finished, you can still put more power output by simply picking the speed that fits the task you are currently assigned to. Moreover, it’s a nice concept to pick a belt sander that comes with adjustable speed settings so you can transform it to a power tool which is amazing for delicate outputs.


As obvious as it is, more amps only means more power. And the same thing can be said with belt sanders. You see, these tools may feature an electric motor that operates between 4 to ten Amps. Thus, if you’re operating on rough surfaces, of course you might want to use a powerful motor. On the flip side, if you are doing tasks with small and softer materials, a 4 to 6 amp will do enough.

PORTER-CABLE 352VS vs. WEN 6502T Belt Sander | Ultimate Battle [2020]

1. PORTER-CABLE 352VS Variable-Speed Belt Sander

PORTER-CABLE Belt Sander with Dust Bag, Variable-Speed, 8 Amp, 3-Inch-by-21-Inch (352VS)All Metal Construction

The Porter Cable 352VS is pretty unique due to its durable and all-metal construction. See, most belt sanders in the market today are pretty much constructed using reinforced plastic, which is not really durable. And since the Porter Cable 352VS is constructed using metal, it is essentially protected from certain elements. Additionally, its sturdy exterior makes this unit hard to damage.

Precision and Versatility

This particular model also comes with various features that add to its precision and versatility as a belt sander. It comes with a powerful 8 amp motor which is engineered for industrial sanding. But even though it is primarily built for industrial sanding, it can also be utilized for other tasks such as intricate wood working.

Variable Speed Dial

On the other hand, its variable speed dial enables the user to pick a speed between 850 SFPM and 1,300 SFP. This enables the user to rival the machine’s speed to the kind of task they are working on. Moreover, it is incorporated with a quick-release belt change lever, ceramic aluminium oxide belt, and an adjustable belt tracking knob which provides better ease of use as well as accuracy.

What We Like

  • Comes with a lock-in safety feature that enables for non-stop sanding without gripping on the trigger constantly
  • Features a detachable dust bag to reduce mess
  • Has a compact design to minimize user strain
  • Easy to change sanding belt
  • Comes with a spacious dust bag

What We Don’t Like

  • Doesn’t come with any adjustable handle
  • Doesn’t come with variable speeds

2. WEN 6502T Belt and Disc Sander

WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron BaseBelt and Disc in One Tool

This particular belt disc sander from Wen is ideal addition to any homeowners’ arsenal as it gives a 4” x 36” belt sander and a 6” x 6” disc. In particular, its belt tilts from 0 to 90 degrees which make it very suitable for any wood working task and eliminating any awkward operation. On the other hand, its disc is incorporated with cast Aluminum worktable that guarantees that users can sand precisely and safely.

Powerful Motor

The Wen 6502T is a powerful tool especially because it operates on a 4.3 Amp and 1/2 HP motor that can go up as much as 3600 revolutions per minute. It also allows you to easily change the sandpaper if there are wear or you just want to switch the grit.


The belt and the disc sit on a durable cast iron base, so rest assured that there are no unnecessary vibrations. Also, you can link the tool to a dust extractor as it comes with a 2.25 inch port connector. And similar to most Wen products out there, the Wen 6502T comes with a 2-year warranty offer.

What We Like

  • Its tension release lever makes changing sandpaper grits easy
  • Incorporated with a 4.3Amp motor that gives as much as 3600 revolution per minute
  • Comes with a sturdy cast iron base that significantly minimizes unnecessary vibrations
  • Its belt can tilt anywhere from 0 to 90 degrees
  • The table is incorporated with a miter gauge

What We Don’t Like

  • This unit’s belt protector plate seems a little bit thin
  • Its disc sander slide can’t be locked to the plate

Useful Tips or Tricks

For the most part, a belt sander is pretty much considered a safe tool. However, it is still wise to take some precautions.

Get Some Hearing Protection

First of all, make sure you have some hearing protection because belt sanders can be pretty loud.

Don’t Inhale the Dust!

Make sure not to breathe the dust because it’s not good for the health. As much as possible, equip yourself a dust mask while doing the work.

Unplug It First

Don’t forget to unplug the power tool before doing any kind of changes such as emptying the dust bag or changing belts.

Clean All the Time

If you use it to sand metal, you might create a fire because of the sparks and the dust residue you didn’t clean beforehand. Make sure to clean it all the time before applying it to any material.

Turn Off the Trigger

Don’t forget to off the trigger before plugging the belt sander in. A belt sander usually comes with a locking button that holds the switch in the “on” mode. Better be safe than sorry later.

Hold It Tight!

If you didn’t know, a belt sander can generate a great amount of force on your work. That’s why if your work is not tightly held, it might slide away right into you!

Closing Words

Most of the time, sanding is always a part of many wood working tasks. It doesn’t matter whether you’re doing some kind of home renovations or improvements or making furniture, belt sanders are needed most of the time.

Also, these tools are actually one of the most trusted version of any sanders out there because they are simple to use and quite versatile. But regardless of it, you must still get the best belt sander if you want to get the most out of your task. As we mentioned above, choosing the best belt sander needs you to consider factors such as speed, weight, motor power, belt size, and many more.

With that said, we hope that you’ll get the best belt sander for your needs. If this review is helpful to you, please leave any comments down below.

Other Tools and Resources:

Sours: https://www.drillanddriver.com/porter-cable-352vs-vs-wen-6502t-belt-sander/
Belt Sander Repair - Replacing the Armature (Porter Cable Part # 909832)

Cruel structure, carelessly fly around it. I have been with my husband for more than 5 years, now I am 21. I married a virgin, did not change my husband.

Belt cordless sander cable porter

They lie only after operations. I was assigned to the ward for the day, apparently hoping that I would not stay long. She gave an injection of no-shpy, which no one prescribed: You will lie down for now, the doctor has already left, and the. Head of the department is on duty today, he will come up by five. The time was half past three.

Porter Cable 20v Orbit Sander

I like mature women, such as you and mother Marina. - Answered Irka, and his son got up from the chair, came up to me from behind, hugged me by the chest. And began to crush my tits, through clothes in front of a friend, and I sat motionless, looking at Irka's reaction. And she, looking at how her son, in front of her eyes, paws his own mother by the breasts, and rudely.

Obscenely squeezes her boobs through her clothes, and that I give them to be crumpled.

Now discussing:

I opened the door for you, which was already ajar in advance, we went into the hotel room. In the half-darkness of the hotel room, even I was slightly confused, but a dark figure sitting on the edge of a huge bed got up and walked. Towards us. He raised his hand and stroked through your hair, touching your face, I noticed how you were shaking, I squeezed your hand.

Thus trying to calm you down and calm your trembling.

1157 1158 1159 1160 1161